‹ 返回事件历史

与拉取请求有关的事件

原文Incident with Pull Requests
已恢复轻微故障GitHub
2026年11月16日星期一 19:59 ~ 2026年11月17日星期二 00:26(4 小时 26 分钟)
受影响组件
Pull Requests
Actions
更新记录
已恢复2026年11月17日星期二 00:26

2026年11月16日协调世界时09:30至15:55之间,GitHub上部分拉取请求合并超时。平均2.9%的合并尝试超时,在协调世界时15:17达到峰值7.1%。部分由拉取请求触发的GitHub Actions工作流运行也出现延迟。推送和拉取等Git操作保持可用,但延迟较高。这是11月13日协调世界时13:15至17:50之间一次较短事件的重演,当时1.7%的合并超时。<br /><br />两次事件的原因相同:部分存储Git仓库数据的存储服务器达到了磁盘读取带宽上限。合并必须写入仓库的每一份副本,因此一台过载的服务器会拖慢其托管的所有仓库的合并。随着按计划将仓库迁移到新基础设施,这些服务器上的读取负载一直在增长。这些服务器上的一项磁盘配置设置还使它们读取了远超必要的数据量,导致其可用带宽大约减半。我们通过修正该设置并将部分负载从最繁忙的服务器上转移来缓解了此次事件。<br /><br />修正后的设置现已永久应用于我们的存储集群。我们正在受影响区域增加存储容量,并对每台服务器的磁盘带宽设置告警,以便在饱和影响客户之前及时发现。持续性的合并超时现在会直接呼叫我们的值班工程师。我们还在将仓库或流量迁移到新基础设施之前增加容量检查。

原文On November 16, 2026, between 09:30 and 15:55 UTC, some pull request merges on GitHub timed out. On average, 2.9% of merge attempts timed out, with a peak of 7.1% at 15:17 UTC. Some GitHub Actions workflow runs triggered by pull requests were also delayed. Git operations such as push and fetch stayed available, with higher latency. This was a repeat of a shorter event on November 13, between 13:15 and 17:50 UTC, when 1.7% of merges timed out.<br /><br />Both events had the same cause: some of the storage servers that hold Git repository data reached their disk read bandwidth limits. A merge must be written to every copy of a repository, so one overloaded server slowed merges for every repository it hosts. Read load on these servers had been growing as part of a planned move of repositories to new infrastructure. A disk configuration setting on those servers also made them read far more data than necessary, which cut their usable bandwidth roughly in half. We mitigated the incident by correcting that setting and moving some load away from the busiest servers.<br /><br />The corrected setting is now applied permanently across our storage fleet. We are adding storage capacity in the affected region and alerting on per-server disk bandwidth so we catch saturation before it affects customers. Sustained merge timeouts will now page our on-call engineers directly. We are also adding capacity checks before moving repositories or traffic onto new infrastructure.

监控中2026年11月17日星期二 00:16

我们已通过减轻受影响系统的负载,缓解了影响拉取请求合并和Actions工作流启动时间的问题。拉取请求和Actions已恢复,我们将继续监控其性能。

原文We’ve mitigated the issue affecting pull request merges and Actions workflow start times by reducing load on affected systems. Pull Requests and Actions have recovered, and we’re continuing to monitor their performance.

监控中2026年11月17日星期二 00:07

影响Actions和Pull Requests的性能降级问题已得到缓解。我们正在监控以确保稳定性。

原文The degradation affecting Actions and Pull Requests has been mitigated. We are monitoring to ensure stability.

排查中2026年11月16日星期一 23:55

我们看到拉取请求合并时间和工作流启动时间出现初步改善迹象,但恢复尚未确认。用户仍可能难以合并拉取请求。我们正在减少受影响系统的负载并监控影响。随着了解更多信息,我们将分享进一步更新。

原文We’re seeing early signs of improvement in pull request merge times & workflow start times, but recovery is not yet confirmed. Users may still have difficulty merging pull requests. We’re reducing load on affected systems and monitoring the impact. We’ll share another update as we learn more.

排查中2026年11月16日星期一 23:46

我们看到拉取请求合并时间有初步改善的迹象,但恢复情况尚未确认。最后一次确认的超时率为2.5%,而基线接近0.2%,因此部分用户可能仍会遇到合并拉取请求的困难。我们将随着了解更多信息分享进一步更新。

原文We’re seeing early signs of improvement in pull request merge times, but recovery is not yet confirmed. The last confirmed timeout rate was 2.5%, compared with a baseline near 0.2%, so some users may still have difficulty merging pull requests. We’ll share another update as we learn more.

排查中2026年11月16日星期一 23:33

Actions 正在经历性能降级。我们正在继续调查。

原文Actions is experiencing degraded performance. We are continuing to investigate.

排查中2026年11月16日星期一 23:03

我们正在继续调查拉取请求合并超时率升高的问题。最新报告的超时率为4.75%,而基线接近0.2%,因此部分用户可能在合并拉取请求时遇到困难。随着我们了解更多信息,我们将分享进一步的更新。

原文We’re continuing to investigate elevated pull request merge timeouts. The latest reported rate is 4.75%, compared with a baseline near 0.2%, so some users may have difficulty merging pull requests. We’ll share another update as we learn more.

排查中2026年11月16日星期一 22:06

我们正在继续调查拉取请求合并超时增多的问题。目前约有3%的合并发生超时,而基线水平接近0.2%。迄今为止的缓解措施尚未显著改善性能,我们的团队正在努力减轻负载并恢复正常服务。随着我们了解更多信息,我们将分享进一步的更新。

原文We’re continuing to investigate elevated pull request merge timeouts. Approximately 3% of merges are timing out, compared with a baseline near 0.2%. Mitigations so far have not materially improved performance, and our teams are working to reduce load and restore normal service. We’ll share another update as we learn more.

排查中2026年11月16日星期一 21:24

我们正在继续调查拉取请求合并超时增多的问题。约2–3%的合并出现超时,而基线接近0.2%。目前的缓解措施尚未恢复正常性能,我们的团队正在继续调查。我们会在了解更多信息后分享进一步更新。

原文We’re continuing to investigate elevated pull request merge timeouts. Approximately 2–3% of merges are timing out, compared with a baseline near 0.2%. Mitigations so far have not restored normal performance, and our teams are continuing to investigate. We’ll share another update as we learn more.

排查中2026年11月16日星期一 20:35

我们正在继续调查拉取请求合并超时增多的问题。大约2–3%的合并出现超时,而基线水平接近0.2%。随着我们了解更多情况,我们将分享另一条更新。

原文We’re continuing to investigate elevated pull request merge timeouts. Approximately 2–3% of merges are timing out, compared with a baseline near 0.2%. We’ll share another update as we learn more.

排查中2026年11月16日星期一 20:00

我们正在调查合并拉取请求时超时增多的问题。部分用户可能无法成功合并拉取请求;超时发生率高于平时。我们正在努力查明原因并恢复正常性能。

原文We’re investigating elevated timeouts when merging pull requests. Some users may be unable to merge pull requests successfully; timeouts are occurring at a higher rate than usual. We’re working to identify the cause and restore normal performance.

排查中2026年11月16日星期一 19:59

我们正在调查关于拉取请求性能下降的报告。

原文We are investigating reports of degraded performance for Pull Requests

事件内容来自 GitHub 官方状态页:查看官方原文。中文由 AI 翻译,仅供快速理解,以官方英文原文为准。

关于这些数据

GitHub的故障事件数据从哪来?

全部来自GitHub 官方状态页的公开接口,由本站每 5 分钟同步一次,保留最近 90 天。事件标题、时间、影响级别与更新记录均为官方原文,本站不做改写;点详情页底部的链接可回到厂商原始记录核对。

顶部的组件状态条怎么看?

每一格是一天,绿色表示GitHub 官方状态页当天未记录异常,黄色表示部分降级,红色表示当天有较大故障,灰色表示该组件当时还没有数据。右侧的可用率是官方口径的 90 天统计,与状态总览页显示的是同一份数据。

为什么有的服务查不到历史?

本页只收录对外提供官方状态页的服务。没有公开状态页的厂商(多数国产大模型属于此类)无法取得可信数据,本站不做自建拨测去猜,因此也不会出现在状态总览里。

持续时长怎么算?

按官方标注的开始时间到恢复时间计算;尚未恢复的事件按「至今」计算并标为进行中。跨天的事件在状态条上会覆盖它经过的每一天。

完整的服务清单与实时状态见状态总览