Internet speed test
Select GO to measure download speed, upload speed, latency and jitter against servers in China. Test data travels only between your browser and the test servers and is never stored on our servers.
What the speed test measures
Download speed is how fast data reaches your device from a server, which affects page loads, video buffering and file downloads. Upload speed measures the opposite direction and affects video calls, live streaming and cloud sync. Latency, or ping, is the round-trip time of a packet; lower latency means faster responses, which matters most for games and live calls. Jitter is how much latency varies, and lower jitter means a more stable connection.
Why do speed test results vary?
Results depend on current network load, routing quality, the distance to and load on the test server, and your device's performance. Test several times at different times of day instead of relying on a single result.
How much data does a speed test use?
A full test (download and upload) typically uses tens to hundreds of megabytes, depending on your speed: the faster the connection, the more data is transferred. Check your data allowance before testing on a mobile network.
Speed test tips
Are Mbps and MB/s the same?
No. ISPs advertise plans in Mbps (megabits per second), while browsers and download managers usually show MB/s (megabytes per second). One byte equals 8 bits, so divide Mbps by 8: a 100 Mbps plan tops out at about 12.5 MB/s.
How much speed do I need?
An SD video call needs about 1–2 Mbps, 1080p streaming about 5–8 Mbps and 4K streaming 25 Mbps or more. Online games need little bandwidth but are sensitive to latency and jitter, so aim for under 50 ms latency and under 10 ms jitter. Households with several people online at once (video meetings, downloads, streaming) need extra headroom to avoid congestion at peak times.
Why is Wi-Fi slower than a wired connection?
Wi-Fi is affected by walls, crowded channels (especially 2.4 GHz), distance from the router and the number of connected devices, so it often falls short of your plan's speed. A cable connected directly to the router or modem has less interference and better reflects your line's real limit. If speeds look wrong, test once over a cable for comparison.
Why is upload speed usually much slower than download?
Most home broadband is asymmetric (for example EPON or GPON fiber), and ISPs allocate more bandwidth to downloads because most people mainly browse and stream. That is why the same line can download at hundreds of Mbps but upload at only tens of Mbps. This is normal, not a fault.
How accurate are online speed tests?
Reputable speed tests, including this one, measure the real throughput and latency between you and the test server. They are useful, but they do not exactly equal your plan's advertised maximum. Server distance and load, your device and your router all play a part, so small variations between tests are normal.
Will a phone and a computer give different results?
Yes. Phone results depend heavily on Wi-Fi or mobile signal strength, chip performance and background apps. A computer on a cable is usually closer to your line's real limit. If you suspect a problem, test on a phone and a computer, over Wi-Fi and over a cable, and compare.
Does the speed test support IPv6?
Yes. The browser sends the test requests itself, so if your connection has IPv6 and the target is dual-stack, it uses IPv6 automatically with no manual switch. The result reflects the stack you actually use (IPv4 or IPv6). To verify IPv6 reachability specifically, use our IPv6 Ping、IPv6 Tcping、IPv6 website speed testtool to check it separately.
Why use CDN nodes across China? Are results accurate?
Our download and upload targets use edge nodes from large CDN providers such as Tencent Cloud, NetEase and Baidu across China. Requests go to the nearest, least-loaded node, which mirrors how you normally browse, download and stream better than a single fixed server. The node chosen still depends on your region, carrier and real-time CDN load, so some variation is normal.